Spectra-precision Survey Pro v3.80 Recon GPS User Manual User Manual download pdf (Page 76)

GPS User’s Manual

Start Recording in Receiver

With the

GPS Mode

set to

Post Process

, go to the Survey menu.

Choose Start Static Rx

. if you want to configure a receiver to

record raw data at a stationary setup. Choose Start Stop/Go Rx.

if you want to configure a receiver to do stop and go data

collection.

Tap to select a new

Rec Interval

Threshold

values.

Tap to select an antenna type and enter the slant or

vertical measurement.

Tap to create a new file in the receiver memory

and begin logging GPS raw data.

Tap to close the file and stop logging GPS raw

data.

Note: only begins the logging of raw data to the

receiver’s internal memory. It does not send the station or antenna

information. For a static receiver, you will automatically be taken to

the Receiver Session screen to enter your station site ID and send the

antenna information. For a stop and go receiver, you will be

prompted to start your first occupation using the Receiver Session

screen.

Data Collection

With the

GPS Mode

set to

Post Process

, go to the Data Collection

screen from the Survey

menu.

Choose if you wish to

Store point in

Receiver and job file

or the

Receiver file only

. If you choose to store the point in

Receiver and

job file,

then the site ID must be a unique point name in the

Survey Pro job and you will be prompted to put the point on the

autonomous layer. If you choose to store the point in the

Receiver

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 94 95

Comments to this Manuals

No comments

Spectra-precision Survey Pro v3.80 Recon GPS User Manual User Manual Page 76

Comments to this Manuals

Related products and manuals for Software Spectra-precision Survey Pro v3.80 Recon GPS User Manual