Spectra-precision Survey Pro v3.80 Recon GPS User Manual User Manual download pdf (Page 38)

GPS User’s Manual

GET Autonomous Base Position

If you are starting from a new point in the job, you can GET an

autonomous GPS position from the receiver to SET the base reference

position and configure the base coordinate in Survey Pro.

Tap to get an autonomous position from the

receiver. If you wish to get an averaged position, enter a number

Average position [n] epochs before GET

Check the results displayed in the edit boxes. If it looks good, tap

to configure the base receiver with this position and begin

broadcasting RTK corrections over the radio link.

Note: If you have post processing data collection turned on, the

receiver will now open a file (with the next available default name),

start recording GPS raw data, and enter the station and antenna

information for this setup.

Rover Receiver Setup

Use the Rover Setup screen to configure a GPS receiver to be an RTK

rover.

Go to Rover Setup

from the Survey menu.

Rover setup procedure depends on how the base was set. If the base

was set with this data collector, the base reference position is already

known in Survey Pro and you can simply SET the rover to start your

survey. If the base was set with a different data collector, you need to

GET the base reference position from the radio link to configure the

base coordinate in Survey Pro and start your RTK survey.

SET Rover with Known Base Position

Tap to select your antenna type and measure the slant

or vertical height of the antenna.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 94 95

No comments

Spectra-precision Survey Pro v3.80 Recon GPS User Manual User Manual Page 38