Spectra-precision Survey Pro v3.80 Recon GPS User Manual User Manual download pdf (Page 58)

GPS User’s Manual

Offset Point

Use this method if you cannot occupy a point directly, but you can

occupy a location close by and provide an azimuth and distance to the

point.

Go to Data Collection

from the Survey menu.

Enter a point name in the

Point

field. If this point already exists,

you will be prompted to overwrite or choose the next available

point.

Enter a Description.

Tap to open the Offset Shots

screen.

Note: You can enter the offset data before or after you occupy the

reference point with GPS.

Tap to occupy the GPS reference point. You will be

prompted for a point name to store the reference point. The

receiver dynamics are switched from motion to static (for

Static on

occupy

mode) and a site occupation begins. When you are happy

with the measurement, tap to return to the Offset Shots

screen.

Enter the distance from the GPS reference point to the offset

point. You can enter the distance by hand or you can get it from

the selected conventional instrument by tapping .

Note: You have to switch to conventional mode to configure the laser

range finder or total station.

Enter the direction (azimuth/bearing) from the reference point to

the offset point. You can enter a direction in one of the following

ways:

Using the horizontal angle returned from the

conventional instrument if you took a shot.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 94 95

No comments

Spectra-precision Survey Pro v3.80 Recon GPS User Manual User Manual Page 58