Spectra-precision FAST Survey User Manual download pdf (Page 16)

English

to configure the rover (see Configuring a Rover on

page 21). From the Comms tab, you will be able to access

the Bluetooth Devices window and select the rover

receiver from the list of remote receivers detected by

Bluetooth, in the same way as you did for the base.

Switching Between

Base and Rover

During a FAST Survey session, you can quickly change the

receiver you are communicating with (provided the receiver

you want to communicate with is within Bluetooth range).

The icon located in the upper-right corner of the FAST

Survey window allows you to change receivers. Tap on this

icon and then:

• Select GPS Base to switch to the base,

• Or select GPS Rover to switch to the rover.

NOTE: If you examine more carefully this icon, you will see

that it changes aspect (base or rover icon) depending on

which receiver is currently communicating with FAST Survey.

In addition, on the Equip menu, a small check box appears in

the icon inside either the GPS Rover or GPS Base button to

indicate which connection is active.

Subsequent Uses In the next sessions of FAST Survey, the software will prompt

you to re-activate the Bluetooth connection you last

established in the previous session, or simply work without a

connection. If you choose the first option, FAST Survey will

automatically re-establish the connection, provided the

concerned receiver is still on and within Bluetooth range.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

No comments

Spectra-precision FAST Survey User Manual Page 16